#SCHLAGE CODE LOCK HOW TO#
#SCHLAGE CODE LOCK CODE#

If you can control the lock from your hub or controller, then it has been paired successfully. Try using your Z-Wave hub or controller to lock or unlock the Schlage Lock. Remember, you may need to have the lock in close proximity to the hub or controller for the command to go through.Ĥ. The lock will transmit a signal, and the hub or controller will pair it with the network. Then press the key when the orange light appears. Activate the lock's keypad, and enter the unique Programming Code. This is the same process you completed in Step 2. Once the system is in its pairing mode, activate the enrollment function on the Schlage Lock.

#SCHLAGE CODE LOCK HOW TO#

Again, you should check the manual for the device for information on how to do this. Put the Z-Wave hub or controller into its Z-Wave inclusion mode. Next you will pair the lock with the Z-Wave network. Please note that you may need to have the lock in close proximity to the Z-Wave hub or controller for the command to go through successfully.ģ. The Z-Wave hub or controller should recognize the signal and clear the lock from the network. Press the key to have the lock transmit a signal. You will see an orange circular light appear next to the on the keypad.

#SCHLAGE CODE LOCK CODE#

With the Z-Wave hub in its exclusion mode, activate your lock's keypad, and enter in the Programming Code shown on the sticker. You can see an example of the sticker in the following picture: You should write this Programming Code down, as you will need it whenever you include or exclude the lock. Each Schlage Z-Wave Lock should have a white sticker underneath its main cover that lists the Programming Code and two default User Codes. This is done by entering the Programming Code for the lock, followed by the key. Next you will activate the learn function on your Schlage Lock. Continue once your panel or hub is in its exclusion mode for clearing Z-Wave devices.Ģ. Check the installation manual for your respective panel or Z-Wave hub to determine how you can put the device into its exclusion mode. Many panels have an automation menu for doing this.

The first step is to put the Z-Wave hub or controller into its exclusion mode. Clearing the lock from the network will help you ensure that it can be paired successfully. Even if the lock is brand-new, it may have been paired with a different Z-Wave network for factory testing purposes. Before you attempt to pair your Schlage Lock, you should clear it from the network first. You will need this code to complete the pairing process.Ĭomplete the following steps to include your Schlage Z-Wave Lock:ġ. You can also save a picture of the code to your phone or tablet. We strongly recommend that you write this code down and keep it somewhere safe.

Please note that each Schlage Z-Wave Door Lock has a unique Programming Code that is used for device enrollment and exclusion. You will use this code during enrollment. Each Schlage Z-Wave lock has a programming code that is used for clearing and pairing. You can include your Schlage Z-Wave Lock by putting your Z-Wave controller into its Z-Wave inclusion mode and then initiating the enrollment function on the lock.

Schlage code lock